Guardrail Roll Forming Machine
Price And Quantity
- 4000000.00 - 5000000.00 INR
- PLC Control
- 20 m/m
- 2.5 Millimeter (mm)
- 220 Watt (w)
- AS PER REQUIR
- 6X40 Foot (ft)
- 15000 Kilograms (kg)
Roll Forming Machine can manufacture a diversity of guard rails which is typically taken into use in highway road. Formed guard rails are entirely in strength, high quality, extended life and they are also convenient to be mounted. One manufacturing machine can make goods of an extensive variety of stipulations, so you will confidently get Profile a lot.
- D coiler 10-ton cap.
- Entry Gate with Roll Forming Streak with 8 Gear Boxes, 16 stations, & 15 H.P. electrical Control Panel.
- Semi auto punching press of 100 tons
- Cutting Unit (Hydro.)
- Maximum sheet thickness that can be molded: 850 mm
- Maximum sheet width in CRCA Strips that can be molded: 5 mm(M.S.)
- Horizontal distance amid shafts: 500mm
- Number of making stations: 16 nos.
- Total HP for Line: 23
- Vertical station: 12 nos.
- Speed of the machine: 3 to 4 mt/minit
- Dimensions of machine: 8500 x 1600 x 1000 mm
- Mandrel Uncoiler
- Coil width: 400 MM
- Coil weight: 10MT Max
- Coil bore: 850 MM min, 1100 MM max dia.
- Mandrel drive: Hydro.
- Back Tension: Manually adjusted
- Punching press
- 5 HP
- 100 tone Hydro. press
- Oil tank 150 liter
- Entry Gate
- Entry gate will be offered for program of sheet to roll former.
- Main Base
- The chief base is a MS made structure and sufficiently ribbed to diminish the alteration. It is precisely machined on bottom and top surfaces the negotiated holes are manufactured on the bed for putting the stands.
- Mill stands (Station)
- The stands are erected on the bed of the appliance the line alignment can be effortlessly completed because guide ways organized on the bed of the appliance. Each making head comprises of a sliding type and fixed housing out board covering. The mill positions will be organized to locate shafts erected on taper bearings. For the highest shafts the bearings are contained in the cartridge sort bearing blocks. The lowest shaft bearings are situated in the bored machined in the coverings. The bottom arbors are fitted in position while the top bowers along with cartridge blocks can be elevated or sank in vertical controllers machined in coverings.
- Roll shafts
- The roll shafts dia. 70 mm will be factory-made from class steel and will be inputted to trace tooling.
- The drive to the roll former is finished a gear box system. The chief drive will be offered by using qoph 15 HP motor
- One established of Tooling with EN31 / D3 evaluation will be from imported substance appropriate for your machine as standard supply. The similar is complicated in processes like rough machining, rough profiling, keyway, hardening, and profile machining trial, bore grinding and examination with last template for above.
- Cutting Unit (Hydro)
- Hydraulically functioned power pack with cutting die with 3 HP electrical.
- 4 Per Year
- 3 Months
- Free samples are available
- Asia, Middle East, Africa
- All India
- AN ISO CERTIFIED ISO 9001:2015
3A/153A, Near DAV College, Faridabad, Haryana, 121001, India